Self-assembled Microcones Generated On Solid Surface Through Pulsed Laser Irradiation
Sucharita Sinha, Anil K.Singh
Volume 4, Issue 6, Page 492-496, Year 2013, Ion Beam Special Issue | DOI: 10.5185/amlett.2012.ib.119
Keywords: Laser surface micro-structuring; self-aligned microcones; stainless Steel; titanium.
We present here our results on surface micro-structuring via nanosecond pulsed laser irradiation of Titanium and Stainless Steel cathode samples. Laser based surface micro-structuring leading to formation of self-assembled micro-tips can potentially enhance field emission efficiency of such surface treated cathodes. Microstructure of the laser treated surfaces has been observed under a Scanning Electron Microscope (SEM) and SEM images were further analyzed using software attached with Optical Microscope. To study the effect of laser fluence on developed surface microstructure, the target surface was irradiated in different regions with laser beams at varying laser fluence levels ranging from 2-10 J/cm2 for a period of 1 to 15 minutes corresponding to 600 to 9000 laser pulses. Mean height of the generated micro-cones was observed to increase from 17 to 30µm on increasing number of irradiating laser pulses from 3000 to 9000 in case of Stainless Steel samples. In case of laser treated Titanium average periodicity of generated self-assembled micro-cones decreased from 10.8μm to 6.5μm when laser fluence was increased from 5 to 10J/cm2 with a total of 600 laser pulses used for irradiating the sample. Copyright © 2013 VBRI press.