Mossbauer, Magnetic, Dielectric And Dc conductivity Of Al3+ ions Substituted Mg-Mn-Ni nano Ferrite Synthesized By Citrate Precursor method
Satish Verma, Jagdish Chand and M. Singh
Volume 4, Issue 4, Page 310-316, Year 2013, Current Issue | DOI: 10.5185/amlett.2012.8410
Keywords: Mossbauer spectroscopy; initial permeability; dielectric constant; dielectric loss.
Nanocrystalline Al3+ ions doped Mg0.2Mn0.5Ni0.3AlyFe2-yO4 compositions, where y=0.0, 0.05 and 0.10 have been synthesized by citrate precursor method. The X-ray diffraction (XRD) revealed that the ferrite has single phase cubic spinel structure. The calculated particle size from XRD data have been verified using transmission electron microscopy (TEM). TEM photographs show that the ferrite powders consist of nanometer-sized particle. It was observed that the particle size decreases as the non-magnetic Al content increases. A decrease in lattice parameter and saturation magnetization with increase in aluminium concentration was attributed to smaller ionic radius and weakening of exchange interaction. Dependence of Mössbauer parameters such as isomer shift, quadrupole splitting and hyperfine magnetic field on Al3+ ions concentration have been discussed. Initial permeability ‘µi’, relative loss factor (RLF), saturation magnetization and remanent magnetization decreases with increasing substitution of Al3+ ions. The dielectric constant and dielectric loss decreases with increase in non magnetic Al3+ ions. The dielectric constant follows the Maxwell–Wagner interfacial polarization. The electrical conduction in these ferrites is explained on the basis of the hopping mechanism. Copyright © 2013 VBRI press.