Indian materials smart materials
News Insight

Advanced Materials World Congress will be held in Stockholm, Sweden during 23-26 August 2015.

Online Advertising

Adv Mat Lett is an official journal of IAAM

VBRI Press is a member of CrossRefDOAJ
Adv Mat Lett is a member of DOAJ

fullabstractpdf

Get PDF

Full Article

Mechanical Properties Of Multifunctional Epoxy resin/glass Fiber Reinforced Composites Modified with Poly(ether Imide)

Jagrati Kandpal, Samar B. Yadaw, Arun K. Nagpal

Volume 4, Issue 3, Page 241-249, Year 2012, Current Issue | DOI: 10.5185/amlett.2012.8403

Keywords: Composites; mechanical properties; polymer blends; thermoplastics; thermosets.

Abstract: 

In the present paper effect of thermoplastic on various mechanical and thermal properties of multifunctional epoxy resin have been studied. Epoxy phenol novolac resin has been cured with hardner diamino, diphenyl sulfone. Changes in mechanical and thermal properties of epoxy phenol novolac resin with engineering thermoplastic poly (ether imide) have been investigated. Specimens were prepared using different mixing orders for multifunctional epoxy resin with poly (ether imide). Effect on glass transition temperature (Tg) were observed by using DSC measurements. Variation in mechanical properties viz. Tensile strength, flexural strength, flexural modulus, interlaminar shear strength and impact strength have been observed. With the thermoplastic modification of thermoset matrix material, improvement in mechanical properties of epoxy-glass fiber reinforced composites have been expected. Changes in storage modulus and loss modulus of all specimens were also evaluated by dynamic mechanical analysis (DMA). Scanning electron microscopy (SEM) was used to investigate the relationship between the morphological study of the fractured epoxy resins and mechanical properties of the modified epoxy resins and glass fiber reinforced composites. If the polymer matrix is fairly brittle (unmodified epoxy), there may be a corresponding reduction in mechanical properties. Incorporation of engineering thermoplastic Poly (ether-imide) has resulted in improvement of above stated mechanical properties. All results indicated that thermoplastic modified multifunctional epoxy resin proved to be a good matrix material which enhances the mechanical properties of glass fiber reinforced composites. Copyright © 2013 VBRI press.

fullabstractpdf

Get PDF

Full Article