Indian materials smart materials
News Insight

Impact Factor of Advanced Materials Letters: 1.93

Online Advertising

Adv Mat Lett is an official journal of IAAM

VBRI Press is a member of CrossRefDOAJ
Adv Mat Lett is a member of DOAJ

fullabstractpdf

Get PDF

Full Article

Tensile Properties Of Strontium Metal 

Andrew E. Frerichs, Alan M. Russell

Volume 3, Issue 5, Page 362-364, Year 2012, Current Issue | DOI: 10.5185/amlett.2012.6360

Keywords: Strontium metal; tensile strength; tensile elongation; strain rate sensitivity

Abstract: 

The yield strength, ultimate tensile strength, elastic modulus, and strain rate sensitivity of pure Sr metal in the as-extruded condition were determined by tensile testing and compared with the properties of other alkaline metals.  Two strain rates were used for testing.  At a strain rate of 6.5×10-4 s-1, Sr has a 0.2% offset yield strength of 71.6 MPa, an ultimate tensile strength of 88.1 MPa, and 10.4% elongation at fracture.  At a strain rate of 6.3×10-3 s-1, Sr has a 0.2% offset yield strength of 81.9 MPa, and ultimate tensile strength of 101.5 MPa, and 5.0% elongation at fracture.  The strain rate sensitivity was determined to be 0.059. Copyright © 2012 VBRI press.

fullabstractpdf

Get PDF

Full Article