Advanced Materials World Congress
News Insight

Impact Factor of Advanced Materials Letters: 1.93

Online Advertising

Adv Mat Lett is an official journal of IAAM

VBRI Press is a member of CrossRefDOAJ
Adv Mat Lett is a member of DOAJ

fullabstractpdf

Get PDF

Full Article abstractpdf

Get PDF

Performance Of Nanopolyaniline-fungal Enzyme Based Biosensor For Water Pollution

B.S. Kushwah, S.C. Upadhyaya, Shipra Shukla, Apurva Singh Sikarwar, R.M.S. Sengar, Seema Bhadauria

Volume 2, Issue 1, Page 43-51, Year 2012 | DOI: 10.5185/amlett.2010.8149

Keywords:

Polyaniline; laccase; nanotechnology; amperometric analysis; phenol biosensor

Abstract: 

The Laccases are oxidoreductases belonging to the multinuclear copper-containing oxidases; they catalyse the monoelectronic oxidation of substrates at the expense of molecular oxygen. These essentially ecofriendly enzymes work with air and produce water as the only by-product. Their uses span from the textile to the pulp and paper industries, and from food applications to bioremediation processes. Laccases also have uses in organic synthesis, where their typical substrates are phenols and amines, and the reaction products are dimers and oligomers derived from the coupling of reactive radical intermediates. Laccase from Pleurotus ostreatus was extracted from the Shaken flask cultures of Pleurotus ostreatus and grown at 25°C with continuous agitation (110 rpm) in baffled  Erlenmeyer flasks (1000 mL) containing 200 mL medium. The basal glucose yeast extract peptone agar medium (GYP medium) used for cultures unless otherwise stated contained 20 g glucose L-1, 5 g yeast extract L-1, 5 g peptone L−1 and 1 g MgSO4.7H2O L−1. The pH was adjusted to 5±0 with H3PO4 prior to sterilization. The kinetics of oxidation reactions catalyzed by laccase was studied using 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid (ABTS). The laccase showed lower specific activity. Enzyme modified electrodes were fabricated with polyaniline. Electrochemical polymerization of aniline was performed to get the film of polymer on the surface of glass electrode. First, ITO/PANI electrode was reduced by a 15 min cathodic polarization of the sensor at -500 mV in 0.1 M acetate buffer, pH 5.5. After cathodic polarization, the film was immersed in 0.1 M of acetate buffer, pH 5.5 containing enzyme solution for the deposition of enzyme in polymer layer at +650 mV for 20 min. During this oxidation process laccase become electrostatically attached to polymer film. The ITO/PANI/LAC electrode was rinsed with deionised water to remove any loosely bounded enzyme, and stored in buffer solution at 4oC, when not in use. Conducting polymer/enzyme modified electrodes prepared by immobilization of enzyme were tested for electrocatalytic activities towards amperometric sensing of phenol in industrial effluent. Copyright © 2011 VBRI press.

 

fullabstractpdf

Get PDF

Full Article abstractpdf

Get PDF

Full Article